Jeti Spin Pro 160 Discount Store

The SPIN Pro controllers are the successor of the SPIN controllers for brushless motors. The Pro series will offer advanced settings compared to older relatives, such as automatic motor advance, direct cut-off voltage setting in volts, start-up tuning for different engine types, and even the ability to activate the autorotation mode for helicopters.

All controllers include a new type of voltage stabilizer for the receiver and servos called BEC, whose voltage is 5.5V. Using this element has opened the way for using the BEC circuit for multi-cell propulsion batteries.

The SPIN controllers are set using JETIBOX. Combining the SPIN with the JETIBOX creates a system that allows optimum adjustment for any type of drive. The controllers are equipped with two JR connectors. The black connector is for connection to a receiver. The connector with red terminal is intended for communication.

Online telemetry
The SPIN PRO controller allows to display the controller status in real time via the Jeti Box. The red connector JR connector can be connected directly to the Jeti Box or to the EXT input. receivers DUPLEX 2,4GHz. Adjustment of the controller parameters using the Jeti Box can only be done if the JR connector with black terminal (motor control) is disconnected from the receiver (or the receiver is switched off). If the controller detects a servo pulse at the black JR connector input when the power is turned on, the controller automatically enters the telemetry data display mode. In this mode, the regulator does not react to pressing the Jeti Box buttons.

Parameters
Dimensions: 85x24x22 mm
Weight: 100 g
Telemetry: yes
Supply voltage: 6 – 34 V
Continuous current:160 A
BEC voltage: 5.5 V
Max. BEC current: 5 A